Continuous Pulse Control of Structures with Material Nonlinearity
A control method is presented for reducing the dynamic response of structures in the inelastic material range using a control force from an active control system. The proposed method of...

Active Control of Axial Forces in Beam String Space Frames
The present work discusses a formulation for active control of axial forces of strings in beam string structures to dynamically and/or statically reduce the responses, and proves both...

Innovations in Major Suspension Bridge Design
Before the Tacoma disaster, the trend in bridge-building is on increasing slenderness. But since its occurrence, a high degree of aerodynamic stability is required. Presented are designs...

Some Applications of Neural Networks in Structural Engineering
After a brief discussion of neural networks and their potential engineering applications, the author's on-going research in application of neural networks in structural engineering will...

Timing Analysis of a Multiprocessor Architecture for Active Control
This paper describes how real-time multiprocessor systems, such as those required for active structural control, can be developed to satisfy timing requirements on hardware and software....

Optimization of Controlled Structures: Using H? Theory
This paper presents the algorithm for the design of a controlled structure in which the structural and control systems are designed simultaneously. The problem is posed as an optimization...

Multiobjective Optimization of Actively Controlled Structures
A general methodology is presented for the multiobjective optimization of actively controlled structures. The methodology can handle structures involving precise as well as fuzzy data....

Stability Analysis of Optimal Active Control Systems with Time-Delay and Other Influence Parameters
This paper presents a theoretical solution for determining the stability region of multi-story buildings equipped with one active tendon controller on a certain floor. In this theoretical...

Digital Signal Processing Techniques for Active Structural Control
In the past, implementation of active structural control strategies employing PC-based hardware has been problematic due to excessive computational times required for processing the measured...

Generalized Optimal Active Control with Embedded and Half-space Soil-Structure Interaction
The paper presents an optimal active control algorithm with soil-structure interaction for seismic response. By using an intelligent device in the feedback gain matrix, the algorithm can...

Modal Filter Based Structural Control of a Highway Bridge
An Adaptive Modal Filter (AMF) algorithm is developed which uncouples complicated multi-mode structural dynamic response into simple single-mode response. The application to active structural...

East River Modeling of Water Quality for Multiple-Project Assessments
The East River Model (ERM), which employs the RMA-2V hydrodynamic and RMA-4 water quality modeling code, was used by Lawler, Matusky & Skelly Engineers to assess water quality...

The Re-derivation of the NDBC Wind-Wave Algorithm
The National Data Buoy Center (NDBC) currently manages a network of 57 moored buoys and approximately 7 Coastal-Marine Automated Network stations on off shore platforms which transmit...

Airports and Air Quality Issues - the European Perspective
This paper presents a detailed review of air quality studies at European Airports since 1986. It also provides a brief analysis of the air quality section of a recent ACI (Europe) environmental...

Operational Interactive Hydrologic Forecasting with the National Weather Service River Forecast System
The National Weather Service River Forecast System (NWSRFS) consists of several major hydrometeorologic subcomponents to model the physics of the flow of water through the hydrologic cycle....

Optimization of Reservoir Releases to Control River Sedimentation Using Differential Dynamic Programming
A new methodology is developed to address sedimentation control in alluvial rivers downstream of reservoirs. An optimization model is posed as a discrete-time optimal control problem to...

Development of Hydro-Scheduling Model for Optimal Joint Operation of Multi-Reservoir Systems
Multipurpose reservoirs in a reservoir system are not limited to supplying ample amounts of water and electricity, but also provide other water demands such as flood control, navigation,...

Dry Weather Stormwater Management - Yakima, WA
The city of Yakima recently completed a Comprehensive Stromwater Management plan to: 1) assess current and projected local runoff quality and 2) develop strategies to improve receiving...

Genetic Algorithms and Neural Networks: Do Pluralized Techniques Hold Any Advantages for Designing Groundwater Quality Assurance Systems?
Methods have recently been developed for designing groundwater monitoring and pollutant containment systems. These methods rely on a variety of new and classical optimization and modeling...

Description of the Application of Goal Programming for Selective Withdrawal Structure Operation
Thermal stratification in reservoirs results in variations of water quality with depth. Selective withdrawal structures with outlets at different vertical locations, can be used to provide...

 

 

 

 

Return to search